Laboratory evaluation of airborne particulate control treatments for simulated aircraft crash recovery operations involving carbon fiber composite materials
DOI:
https://doi.org/10.5055/ajdm.2015.0214Keywords:
composite materials, aircraft crash recovery, dust controlAbstract
Objective: This study compared four treatment protocols to reduce airborne composite fiber particulates during simulated aircraft crash recovery operations.
Design: Four different treatments were applied to determine effectiveness in reducing airborne composite fiber particulates as compared to a “no treatment” protocol. Both “gold standard” gravimetric methods and real-time instruments were used to describe mass per volume concentration, particle size distribution, and surface area. The treatment protocols were applying water, wetted water, wax, or aqueous film-forming foam (AFFF) to both burnt and intact tickets of aircraft composite skin panels. The tickets were then cut using a small high-speed rotary tool to simulate crash recovery operations.
Setting: Aerosol test chamber.
Subjects, participants: None.
Interventions: Airborne particulate control treatments.
Main outcome measures: Measures included concentration units of milligrams per cubic meter of air, particle size distribution as described by both count median diameter and mass median diameter and geometric standard deviation of particles in micrometers, and surface area concentration in units of square micrometers per cubic centimeter. Finally, a Monte Carlo simulation was run on the particle size distribution results. Comparison was made via one-way analysis of variance.
Results: A significant difference (p < 0.0001) in idealized particle size distribution was found between the water and wetted water treatments as compared to the other treatments for burnt tickets.
Conclusions: Emergency crash recovery operations should include a treatment of the debris with water or wetted water. The resulting increase in particle size will make respiratory protection more effective in protecting the response crews.
References
Pickett BM, Dierdorf DS, Wells SP: Firefighting and Emergency Response Study of Advanced Composites Aircraft: Objective 2: Firefighting Effectiveness of Technologies and Agents on Composite Aircraft Fires. AFRL-RX-TY-TR-2011-0047. Tyndall AFB, FL: Air Force Research Laboratory Materials and Manufacturing Directorate, 2011.
Hale J: Boeing 787 from the ground up. AeroMagazine. 2006; Quarter 4: 17-23.
Mouritz AP: Review of smoke toxicity of fiber-polymer composites used in aircraft. J Aircr. 2009; 46(3): 737-745.
Gandhi S, Lyon R, Speitel L: Potential health hazards from burning aircraft composites. J Fire Sci. 1999; 17: 20-41.
ASTM E2456-06(2012): Standard Terminology Relating to Nanotechnology. West Conshohocken, PA: ASTM International, 2012.
Sussholtz B: Evaluation of Micron Size Fiber Release from Burning Graphite Composites. Hampton: NASA, 1980.
Lam CW, James JT, McCluskey R, et al.: Pulmonary toxicity of single-wall carbon nanotubes in mice 7 and 90 days after intratracheal instillation. Toxicol Sci. 2004; 77: 126-134.
Shvedova AA, Kisin E, Mercer R, et al.: Unusual inflammatory and fibrogenic pulmonary responses to single-walled carbon nanotubes in mice. Am J Physiol Lung Cell Mol Physiol. 2005; 289: 698-708.
Lam CW, James JT, McCluskey R, et al.: A review of carbon nanotube toxicity and assessment of potential occupational and environmental health risks. Crit Rev Toxicol. 2006; 36: 189-217.
Poland CA, Duffin R, Kinlock I, et al.: Carbon nanotubes introduced into the abdominal cavity of mice show asbestos-like pathogenicity in a pilot study. Nat Nanotechnol. 2008; 3: 423-428.
Huang G, Park JH, Cena LG, et al.: Evaluation of airborne particle emissions from commercial products containing carbon nanotubes. J Nanopart Res. 2012; 14: 1231.
Schlagenhauf L, Nuesch F, Wang J: Release of carbon nanotubes from polymer nanocomposites. Fibers. 2014; 2: 108-127.
Lavitt MO: B-2 crashes on takeoff from Guam. Aviation Week. February 23, 2008.
Schroeder JL, Hawk JR: Firefighting and Emergency Response Study of Advanced Composites Aircraft: Objective 3: Penetrating and Overhauling Wreckage. AFRL-RX-TY-TR-2011-0048. Tyndall AFB, FL: Air Force Research Laboratory Materials and Manufacturing Directorate, 2011.
United States Air Force: T.O. 00-105E-00, Aerospace Emergency Rescue and Mishap Response Information (Emergency Services). Washington, DC: US Air Force, 2008.
Flynn MR, Susi P: Engineering controls for selected silica and dust exposures in the construction industry—A review. Appl Occup Environ Hyg. 2003; 18(4): 268-277.
Middaugh B, Hubbard B, Zimmerman N, et al.: Evaluation of cut-off saw exposure control methods for respirable dust and crystalline silica in roadway construction. J Occup Environ Hyg. 2012; 9(3): 157-165.
Sawyer RN, Rohl AN, Langer AM: Airborne fiber control in buildings during asbestos material removal by amended water methodology. Environ Res. 1985; 36(1): 46-55.
Heitbrink WA, Evans DE, Ku BK, et al.: Relationships among particle number, #surface |area, and respirable mass concentration in automotive engine manufacturing. J Occup Environ Hyg. 2009; 6(1): 19-31.
ACGIH: TLVs and BEIs Based on the Documentation of the Threshold Limit Values for Chemical Substances and Physical Agents & Biological Exposure Indices. Cincinnati: ACGIH Press, 2012.
Maynard AD: Nanotechnology: The next big thing, or much ado about nothing. Ann Occup Hyg. 2006; 51(1): 1-12.
Wilson WE, Stanek J, Han H-S, et al.: Use of the electrical aerosol detector as an indicator of the surface area of fine particles deposited in the lung. J Air Waste Manag Assoc. 2007; 57: 211-220.
Storage K: Composite ticket makeup. (M. Ferreri, Interviewer, August 19, 2009.)
Ferreri MR, Slagley JM, Felker DL: Characterization of advanced composite material particles released during simulated crash recovery operations. Poster presented at American Industrial Hygiene Conference and Exposition, Toronto, ON, Canada, June 3, 2009.
TSI: The purpose and application of ISO 21501-4: Application note CC-117(US). 2014. Available at http://www.tsi.com/uploadedFiles/_Site_Root/Products/Literature/Application_Notes/Purpose_and_Application_of_ISO%2021501-4_CC-117_US_web.pdf. Accessed January 26, 2015.
TSI: Model 8220 AeroTrak handheld optical particle counter operation and service manual. 2006. Available at http://dustmonitors.ru/d/68562/d/hand_opc-8220_manual_1.pdf. Accessed January 22, 2015.
TSI: PTrak 8525 operation and service manual. 2013. Available at http://www.tsi.com/uploadedFiles/_Site_Root/Products/Literature/Manuals/Model-8525-P-Trak-1980380.pdf. Accessed January 7, 2015.
TSI: Coincidence correction of Model 3007. (M. Ferreri, Interviewer, 2009.)
O’Shaughnessy PT, Slagley JM: Photometer response determination based on aerosol physical characteristics. Am Ind Hyg Assoc J. 2002; 63: 578-585.
TSI: AeroTrak 9000 user guide, revision C. 2013. Available at http://www.tsi.com/uploadedFiles/_Site_Root/Products/Literature/Manuals/AeroTrak9000_Manual-1990083.pdf. Accessed January 7, 2015.
Hinds WC: Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particles. 2nd ed. New York: John Wiley and Sons, Inc., 1999.
National Institute for Occupational Safety and Health: Pocket Guide to Chemical Hazards. 2nd ed. graphite (natural). Cincinnati: NIOSH, 2006.
Eninger RM, Honda T, Reponen T, et al.: What does respirator certification tell us about filtration of ultrafine particles? J Occup Environ Hyg. 2008; 5(5): 286-295.
Balmes J: The lungs. In Plog BA, Quinlan PJ (eds.): Fundamentals of Industrial Hygiene. 6th ed. Itasca, IL: National Safety Council Press, 2012: 37-54.
Originally published in Journal of Emergency Management, 2015; 13(5): 468-476. DOI:10.5055/jem.2015.0256.
Published
How to Cite
Issue
Section
License
Copyright 2007-2023, Weston Medical Publishing, LLC
All Rights Reserved
